515 Results for : operates

  • Thumbnail
    AS 6C62256-55PCN - SRAM, 32 Kb (4 K x 8), 5 V, 55ns, DIL-28
    32K X 8-bit Low Power CMOS SRAM, SRAM, 5V 32kx8 55ns DIP28The AS6C62256 is a 262,144-bit Low Power CMOS static random access memory organized as 32,768 words by 8 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The AS6C62256 is well designed for low power application, and particularly well suited for battery back-up nonvolatile memory application. The AS6C62256 operates with wide range power supply 2.7 ~ 5.5V
    • Shop: reichelt elektronik
    • Price: 4.75 EUR excl. shipping
  • Thumbnail
    LMC 662 CN - Operationsverstärker, 2-fach, DIP-8
    The LMC662 CMOS Dual operational amplifier is ideal for operation from a single supply. It operates from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground.Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input V OS, drift, and broadband noise as well as voltage gain into realistic loads (2 kO and 600 O) are all equal to or better than widely accepted bipolar equivalents.
    • Shop: reichelt elektronik
    • Price: 2.15 EUR excl. shipping
  • Thumbnail
    AS 6C1008-55PCN - SRAM, 1 Mb (128 K x 8), 5 V, 55ns, DIL-32
    128K X 8 bit Low Power CMOS SRAM, SRAM, 5V 128kx8 55ns DIP32The AS6C1008 is a 1,048,57 6-bit Low Power CMOS static random access memory organized as 131,072 words by 8 bits. It is fabricated using very high performance, high reliability CMO S technology. Its standby current is stable within the range of operating temperature. The AS6C1008 is well designed for very low power system applications, and particularly well suited for battery back-up non-volatile memory application. The AS6C1008 operates from a single power supply of 2.7V ~ 5.5V.
    • Shop: reichelt elektronik
    • Price: 4.55 EUR excl. shipping
  • Thumbnail
    LM 5030 MM - Spezial-Schaltregler, 1-fach, 100 V, 16 V, MSOP-10
    The LM5030 High Voltage PWM controller contains all of the features needed to implement Push-Pull and Bridge topologies, using current-mode control in a small 10 pin package. This device provides two alternating gate driver outputs. The LM5030 includes a high-voltage start-up regulator that operates over a wide input range of 14V to 100V. Additional features include: error amplifier, precision reference, dual mode current limit, slope compensation, softstart, sync capability and thermal shutdown. This high speed IC has total propagation delays less than 100ns and a 1MHz capable single resistor adjustable oscillator.
    • Shop: reichelt elektronik
    • Price: 2.25 EUR excl. shipping
  • Thumbnail
    AD 5324 BRMZ - D/A-Wandler, 12-bit, 4-Kanal, MSOP-10
    The AD5304/AD5314/AD5324 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 µA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achieved with a slew rate of 0.7 V/µs. A 3-wire serial interface is used; it operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards.
    • Shop: reichelt elektronik
    • Price: 20.15 EUR excl. shipping
  • Thumbnail
    AD 7923 BRUZ - A/D-Wandler, 12-bit, 4-Kanal, TSSOP-16
    The AD7923 is a 12-bit, high speed, low power, 4-channel, successive approximation (SAR) ADC. It operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 200 kSPS. It contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 8 MHz. The conversion process and data acquisition are controlled by CS and the serial clock, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS, the conversion is also initiated at this point.
    • Shop: reichelt elektronik
    • Price: 8.35 EUR excl. shipping
  • Thumbnail
    DS 90LV019 TM - Schnittstellen-IC, 1 Treiber / 1 Empfänger, SO-14
    The DS90LV019 is a Driver/Receiver designed specifically for the high speed low power point-to-point interconnect applications. The device operates from a single 3.3V, or 5.0V, power supply and includes one differential line driver and one receiver. The DS90LV019 features an independent driver and receiver with TTL/CMOS compatibility (D IN and R OUT). The logic interface provides maximum flexibility as 4 separate lines are provided (D IN , DE, RE, and R OUT). The device also features a flow-through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver has 3.5 mA output loop current.
    • Shop: reichelt elektronik
    • Price: 5.35 EUR excl. shipping
  • Thumbnail
    AD 8021 ARMZ - Operationsverstärker, 1-fach, 120 V/µs, 200 MHz, MSOP-8
    The AD8021 is an exceptionally high performance, high speed voltage feedback amplifier that can be used in 16-bit resolution systems. It is designed to have both low voltage and low current noise (2.1 nV/vHz typical and 2.1 pA/vHz typical) while operating at the lowest quiescent supply current (7 mA @ ±5 V) among today’s high speed, low noise op amps. The AD8021 operates over a wide range of supply voltages from ±2.25 V to ±12 V, as well as from single 5 V supplies, making it ideal for high speed, low power instruments. An output disable pin allows further reduction of the quiescent supply current to 1.3 mA.
    • Shop: reichelt elektronik
    • Price: 3.80 EUR excl. shipping
  • Thumbnail
    IS61LV5128AL10KL - SRAM, 4 Mb (512 K x 8), 3,135 ... 3,6 V, SO-36J
    512Kx8 High-Speed CMOS Static RAM, SRAM, 3,3V 10ns SOJ36The ISSI IS61LV5128AL is a very High-Speed, Low Power, 524,288-word by 8-bit CMOS Static RAM. The IS61LV5128AL is fabricated using ISSI's high-performance CMOS technology. This highly reliable process coupled with innovative circuit design techniques, yields higher performance and Low Power consumption devices. When CE is HIGH (deselected), the device assumes a standby mode at which the power dissipation can be reduced down to 250 µW (typical) with CMOS input levels. The IS61LV5128AL operates from a single 3.3V power supply and all inputs are TTL-compatible. The IS61LV5128AL is available in 36-pin 400-mil SOJ, 36- pin mini BGA, and 44-pin TSOP (Type II) packages
    • Shop: reichelt elektronik
    • Price: 7.08 EUR excl. shipping
  • Thumbnail
    NE 556 DIL - Dual bipolar Timer-IC, DIP-14
    GENERAL PURPOSE DUAL BIPOLAR TIMERSGehäuse: DIL-14LOWTURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATERTHAN 500kHzTIMING FROM MICROSECONDS TO HOURS OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES HIGH OUTPUT CURRENT CAN SOURCE OR SINK 200mA ADJUSTABLE DUTY CYCLE TTL COMPATIBLE TEMPERATURE STABILITYOF 0.005% PER °CDESCRIPTIONTheNE556 dual monolithic timing circuit is a highly stable controller capable of producingaccuratetime delays or oscillation. In the time delay mode of operation, the time is precisely controlledby oneexternal resistor and capacitor. For a stable operation as an oscillator, the freerunning frequency and the duty cycle are both accurately controlled with two externalresistors and one capacitor. The circuit may be triggered and reset on falling waveforms, and theoutput structure can source or sink up to 200mA.
    • Shop: reichelt elektronik
    • Price: 0.57 EUR excl. shipping

Similar searches: