173 Results for : circuitry

  • Thumbnail
    Borderland Circuitry
    Borderland Circuitry ab 84.49 € als gebundene Ausgabe: Immigration Surveillance in the United States and Beyond. Aus dem Bereich: Bücher, Wissenschaft, Politikwissenschaft,
    • Shop: hugendubel
    • Price: 84.49 EUR excl. shipping
  • Thumbnail
    AM 26C31 CD - RS422, 4 Treiber / 4 Empfänger, SO-16
    The AM26C31 is a differential line driver with complementary outputs, designed to meet the requirements of TIA/EIA-422-B and ITU (formerly CCITT). The 3-state outputs have high-current capability for driving balanced lines, such as twisted-pair or parallel-wire transmission lines, and they provide the high-impedance state in the power-off condition. The enable functions are common to all four drivers and offer the choice of an active high (G) or active-low (G) enable input. BiCMOS circuitry reduces power consumption without sacrificing speed.
    • Shop: reichelt elektronik
    • Price: 1.15 EUR excl. shipping
  • Thumbnail
    LMD 18201 T - Motortreiber, Halbbrücke, TO-220-11
    The LMD18201 is a 3A H-Bridge designed for motion control applications. The device is built using a multi-technology process which combines bipolar and CMOS control circuitry with DMOS power devices on the same monolithic structure. The H-Bridge configuration is ideal for driving DC and stepper motors. The LMD18201 accommodates peak output currents up to 6A. Current sensing can be achieved via a small sense resistor connected in series with the power ground lead. For current sensing without disturbing the path of current to the load, the LMD18200 is recommended.
    • Shop: reichelt elektronik
    • Price: 32.15 EUR excl. shipping
  • Thumbnail
    Borderland Circuitry
    Borderland Circuitry ab 30.99 € als epub eBook: Immigration Surveillance in the United States and Beyond. Aus dem Bereich: eBooks, Fachthemen & Wissenschaft, Sozialwissenschaften,
    • Shop: hugendubel
    • Price: 30.99 EUR excl. shipping
  • Thumbnail
    LM 2937 IMP-12 - LDO-Regler, fest, 12 V, SOT-223-4
    The LM2937 is a positive voltage regulator capable of supplying up to 500 mA of load current. The use of a PNP power transistor provides a low dropout voltage characteristic. With a load current of 500 mA the minimum input to output voltage differential required for the output to remain in regulation is typically 0.5 V (1-V ensured maximum over the full operating temperature range). Special circuitry has been incorporated to minimize the quiescent current to typically only 10 mA with a full 500-mA load current when the input to output voltage differential is greater than 3 V.
    • Shop: reichelt elektronik
    • Price: 2.62 EUR excl. shipping
  • Thumbnail
    LM 2937 IMP-2.5 - LDO-Regler, fest, 2,5 V, SOT-223-4
    The LM2937 is a positive voltage regulator capable of supplying up to 500 mA of load current. The use of a PNP power transistor provides a low dropout voltage characteristic. With a load current of 500 mA the minimum input to output voltage differential required for the output to remain in regulation is typically 0.5 V (1-V ensured maximum over the full operating temperature range). Special circuitry has been incorporated to minimize the quiescent current to typically only 10 mA with a full 500-mA load current when the input to output voltage differential is greater than 3 V.
    • Shop: reichelt elektronik
    • Price: 1.46 EUR excl. shipping
  • Thumbnail
    DS 3486 M - RS485/422, 4 Empfänger, SO-16
    Texas Instruments' quad RS-422, RS-423 receiver features four independent receivers which comply with EIA Standards for the electrical characteristics of balanced/unbalanced voltage digital interface circuits. Receiver outputs are 74LS compatible, TRI-STATE structures which are forced to a high impedance state when the appropriate output control pin reaches a logic zero condition. A PNP device buffers each output control pin to assure minimum loading for either logic one or logic zero inputs. In addition, each receiver has internal hysteresis circuitry to improve noise margin and discourage output instability for slowly changing input waveforms.
    • Shop: reichelt elektronik
    • Price: 1.40 EUR excl. shipping
  • Thumbnail
    LM 2937 ET-5.0 - LDO-Regler, fest, 5 V, TO-220-3
    The LM2937 is a positive voltage regulator capable of supplying up to 500 mA of load current. The use of a PNP power transistor provides a low dropout voltage characteristic. With a load current of 500 mA the minimum input to output voltage differential required for the output to remain in regulation is typically 0.5 V (1-V ensured maximum over the full operating temperature range). Special circuitry has been incorporated to minimize the quiescent current to typically only 10 mA with a full 500-mA load current when the input to output voltage differential is greater than 3 V.
    • Shop: reichelt elektronik
    • Price: 1.75 EUR excl. shipping
  • Thumbnail
    LM 2937 IMP-3.3 - LDO-Regler, fest, 3,3 V, SOT-223
    The LM2937 is a positive voltage regulator capable of supplying up to 500 mA of load current. The use of a PNP power transistor provides a low dropout voltage characteristic. With a load current of 500 mA the minimum input to output voltage differential required for the output to remain in regulation is typically 0.5 V (1-V ensured maximum over the full operating temperature range). Special circuitry has been incorporated to minimize the quiescent current to typically only 10 mA with a full 500-mA load current when the input to output voltage differential is greater than 3 V.
    • Shop: reichelt elektronik
    • Price: 1.89 EUR excl. shipping
  • Thumbnail
    ISO 7221 AD - Schnittstellen-Isolator, 2-Kanal, SO-8
    The ISO7220 and ISO7221 are dual-channel digital isolators. To facilitate PCB layout, the channels are oriented in the same direction in the ISO7220 and in opposite directions in the ISO7221. These devices have a logic input and output buffer separated by TI's silicon-dioxide (SiO2) isolation barrier, providing galvanic isolation of up to 4000 V PK per VDE. Used in conjunction with isolated power supplies, these devices block high voltage, isolate grounds, and prevent noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry.
    • Shop: reichelt elektronik
    • Price: 3.99 EUR excl. shipping

Similar searches: